Allied Telesis AT-GS924GB - Manual (Page 31)

AT-GS924GB Gigabit Ethernet Switch Installation Guide
19
Installing an Optional GBIC Module
To install an optional GBIC module, perform the following procedure:
1. Unpack the GBIC module from its shipping container and store the
packaging material in a safe location.
Figure 8 GBIC Module
Note
You must use the original shipping material if you need to return
the module to Allied Telesyn.
Warning
A GBIC module can be damaged by static electricity. Ensure that
you observe all standard electrostatic discharge (ESD) precautions,
such as wearing an antistatic wrist strap, to avoid damaging the
module.
2. Check that the GBIC package includes all the items listed below. If any
item is missing or damaged, contact your Allied Telesyn sales
representative for assistance.
One GBIC module
Installation guide
Warranty card
Note
For fiber optic cabling specifications for the module, refer to the
Installation Guide included with the module.
3. Follow these guidelines to ensure the performance of your GBIC:
GBICs are static sensitive. To prevent Electrostatic Discharge
Damage (ESD), follow your normal board and component
handling procedures.