Allied Telesis AT-GS924GB - Manual (Page 18)

Product Description
6
LEDs The port LEDs on the front panel display port status information. Each
port has four LEDs.
Figure 4 LEDs
Table 1 below describes the AT-GS924GB port LEDs.
AC Power
Connector
The AT-GS924GB switch has a single AC power supply socket on the
back panel with auto-switch AC inputs. Refer to Technical
Specifications on page 31, for the input voltage range. To power ON or
OFF the switch, you connect or disconnect the power cord.
Table 1 Port LED Descriptions
LED State Description
10 Green Indicates that the port is operating at 10
Mbps.
100 Green Indicates that the port is operating at 100
Mbps.
10 and
100 Green Indicates that the port is operating at
1000 Mbps.
ACT OFF Indicates that there is no activity on the
port.
Flashing Green Indicates that the port is transmitting
and/or receiving data packets.
FDX OFF Indicates that the port is operating in
half-duplex mode.
Green Indicates that the port is operating in full-
duplex mode.
AT-GS924GB
10/100/1000Base-T Gigabit Ethernet Switch with GBIC Uplinks