Allied Telesis AT-GS924 - Manual (Page 40)

Translated Electrical Safety and Emission Information
40
Standards: This product meets the following standards.
1 RFI Emission FCC Class A, EN55022 Class A,
VCCI Class A, C-TICK
2 WARNING: In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
3 Immunity EN55024
4 Electrical Safety EN60950 (TUV), UL60950 (
c
UL
us
), CE
SAFETY
5 ELECTRICAL NOTICES
WARNING: ELECTRIC SHOCK HAZARD
To prevent ELECTRIC shock, do not remove the cover. No user-serviceable parts
inside. This unit contains HAZARDOUS VOLTAGES and should only be opened by a
trained and qualified technician. To avoid the possibility of ELECTRIC SHOCK,
disconnect electric power to the product before connecting or disconnecting the
LAN cables.
6 LIGHTNING DANGER
DANGER: DO NOT WORK on equipment or CABLES during periods of LIGHTNING
ACTIVITY.
7 CAUTION: POWER CORD IS USED AS A DISCONNECTION DEVICE. TO DE-ENERGIZE
EQUIPMENT, disconnect the power cord.
8 ELECTRICAL - TYPE CLASS 1 EQUIPMENT
THIS EQUIPMENT MUST BE EARTHED. Power plug must be connected to a properly
wired earth ground socket outlet. An improperly wired socket outlet could place
hazardous voltages on accessible metal parts.
9 PLUGGABLE EQUIPMENT: The socket outlet shall be installed near the equipment
and shall be easily accessible.
10 CAUTION: Air vents must not be blocked and must have free access to the room
ambient air for cooling.
11 OPERATING TEMPERATURE: This product is designed for a maximum ambient
temperature of 40° degrees C.
12 ALL COUNTRIES: Install product in accordance with local and National Electrical
Codes.
U.S. Federal Communications Commission
Radiated Energy
Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with this instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
Note: Modifications or changes not expressly approved by the manufacturer or the FCC can void your right to
operate this equipment.
Canadian Department of Communications
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du
Canada.