Allied Telesis AT-GS924 - Manual (Page 14)

Product Description
14
AC Power
Connector
Both AT-GS916 and AT-GS924 Gigabit Ethernet switches have a single
AC power supply socket on the back panel, which has an autoswitch AC
inputs. Refer to ”Technical Specifications” on page 35, for the input
voltage range. To power ON or OFF the switch, you connect or
disconnect the power cord.
ACT Green A valid link has been established
between the port and the end-node.
Flashing
Green The port is transmitting and/or
receiving data packets.
OFF There is no link established between
the port and the end-node.
FDX Green The port is operating in full-duplex
mode.
OFF The port is operating in half-duplex
mode.
Table 1 System and Port LEDs
LED State Description