Allied Telesis AT-GS924 - Manual (Page 24)

Installation
24
Unpacking the Switch
To unpack an AT-GS916 or an AT-GS924 switch, perform the following
procedure:
1. Remove all components from the shipping package.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesyn.
2. Place the switch on a level, secure surface.
3. Ensure the following hardware components are included in your
switch package. If any item is missing or damaged, contact your
Allied Telesyn sales representative for assistance.
‰ One AT-GS916 or AT-GS924 Gigabit Ethernet switch
‰ Two mounting brackets
‰ Eight flathead Phillips screws
‰ AC power cord
‰ AC power cord retaining clip
‰ Documentation CD
‰ Warranty card