Allied Telesis AT-VIEW PLUS 3.1 VLAN MANAGER - Manual (Page 56)

Allied Telesyn AT-VIEW PLUS
VLAN MANAGER
PN 613-50666-00 Rev B Page 56 of 56
6.13.2 Add/Modify VLAN Dialogs
The Add/Modify VLAN Dialogs have the following Input Fields:
Input Field Valid Values Length
Name (cannot be
modified)
• Alphanumeric characters
• Underscore ("_")
• Dash ("-")
Note - VLAN names cannot start with a digit and cannot
contain period '.' or slash symbols '/'.
1 - 15 characters
Identifier (cannot
be modified) • 1 - 512 (AT-RG656BD)
• 1 - 4094 (AT-RG613TX / AT-RG613SH)
-
Priority (cannot be
modified)
• 0 - 7
Note - This field is implemented as a drop-down list.
-
Note - AT-RG634A : As a general rule, a port can be a member of several VLANs but can only
be an untagged member of one VLAN. The current firmware version for the AT-RG600 ADSL
series, however, operates differently and does not follow this rule. If a port is initially an
untagged member of a VLAN, then it can no longer be a member of other VLANs. On the other
hand, if a port is initially a tagged member of a VLAN, then it can only be added to other VLANs
as a tagged member also.
6 Device Support