Allied Telesis AT-VIEW PLUS 3.1 VLAN MANAGER - Manual (Page 46)

Allied Telesyn AT-VIEW PLUS
VLAN MANAGER
Note - For 20-character VLAN Names entered via telnet, only the first 19 characters are
registered in VLAN Manager.
6.8.2 Add/Modify VLAN Dialogs
The Add/Modify VLAN Dialogs have the following Input Fields:
Input Field Valid Values Length
Name
• Alphanumeric characters
• Underscore ("_")
• Dash ("-")
Note - VLAN names must contain at least one (1)
alphabet character.
1 - 20 characters
Identifier (cannot
be modified)
1 - 4094 -
Note - For the VLAN Name parameter, the current firmware version allows up to 19 characters
to be entered via SNMP and up to 20 characters via telnet. Since AT-View Plus VLAN Manager
is an SNMP-based application, the 19-character limit will apply to all operations involving
VLAN Name.
6 Device Support
PN 613-50666-00 Rev B Page 46 of 56