Allied Telesis AT-VIEW PLUS 3.1 VLAN MANAGER - Manual (Page 44)

Allied Telesyn AT-VIEW PLUS
VLAN MANAGER
6.7.2 Add/Modify VLAN Dialogs
The Add/Modify VLAN Dialogs have the following Input Fields:
Input Field Valid Values Length
Name
• Alphanumeric characters
• Underscore ("_")
• Dash ("-")
Note - VLAN names must contain at least one (1)
alphabet character.
1 - 20 characters
Identifier (cannot
be modified)
1 - 4094 -
Note - For the VLAN Name parameter, the current firmware version allows up to 19 characters
to be entered via SNMP and up to 20 characters via telnet. Since AT-View Plus VLAN Manager
is an SNMP-based application, the 19-character limit will apply to all operations involving
VLAN Name.
Note - AT-8550 : The current firmware version does not allow AT-View Plus VLAN Manager to
perform Add VLAN, Modify VLAN and Import VLAN operations that involve ports 33 to 50.
Attempting to perform such operations will result in the error message: "An error occurred during
the operation. Error: Wrong value."
6 Device Support
PN 613-50666-00 Rev B Page 44 of 56