Allied Telesis AT-S63 - Manual (Page 547)

547
Chapter 32
Internet Protocol Version 4 Packet
Routing
This chapter contains the overview and commands for Internet Protocol
version 4 (IPv4) packet routing on the AT-9400 Series switch. The chapter
covers routing interfaces, static routes, and the Routing Information
Protocol (RIP) versions 1 and 2. The sections in the chapter include:
ˆ “Internet Protocol Version 4 Packet Routing Overview” on page 548
ˆ “ADD IP ARP” on page 571
ˆ “ADD IP INTERFACE” on page 573
ˆ “ADD IP RIP” on page 575
ˆ “ADD IP ROUTE” on page 577
ˆ “DELETE IP ARP” on page 580
ˆ “DELETE IP INTERFACE” on page 581
ˆ “DELETE IP RIP” on page 583
ˆ “DELETE IP ROUTE” on page 584
ˆ “DISABLE IP ROUTE MULTIPATH” on page 585
ˆ “ENABLE IP ROUTE MULTIPATH” on page 586
ˆ “PURGE IP” on page 587
ˆ “SET IP ARP” on page 588
ˆ “SET IP ARP TIMEOUT” on page 589
ˆ “SET IP INTERFACE” on page 590
ˆ “SET IP LOCAL INTERFACE” on page 592
ˆ “SET IP RIP” on page 593
ˆ “SET IP ROUTE” on page 595
ˆ “SHOW IP ARP” on page 597
ˆ “SHOW IP COUNTER” on page 599
ˆ “SHOW IP INTERFACE” on page 601
ˆ “SHOW IP RIP COUNTER” on page 603
ˆ “SHOW IP RIP INTERFACE” on page 605
ˆ “SHOW IP ROUTE” on page 607
Note
Remember to save your changes with the SAVE CONFIGURATION
command.