Allied Telesis AT-S63 - Manual (Page 539)

AT-S63 Management Software Command Line Interface User’s Guide
Section VI: Virtual LANs 539
Description
This command is the first in the series to creating a MAC address-based
VLAN. This command assigns the VLAN a name and a VID and sets the
VLAN type. After you have initially created the VLAN with this command,
you must assign the MAC addresses. These are the source addresses of
the nodes that are to belong to the VLAN. The command for adding MAC
addresses to a VLAN is “ADD VLAN MACADDRESS” on page 536.
The final step to creating a new MAC address-based VLAN is assigning
the egress ports to the MAC addresses. The command for this is “ADD
VLAN PORT MACADDRESS” on page 537.
Examples
The following command creates a MAC address-based VLAN called Sales
and assigns it a VID of 3:
create vlan=Sales vid=3 type=macaddress