AMX NetLinx ZigBee Compatible Gateway and Repeater NXR-ZGW/-ZRP - Manual (Page 21)

NXR-ZGW Browser-based Configuration Manager Pages
15 NXR-ZGW/-ZRP
NXR-ZGW Browser-based Configuration
Manager Pages
To access the Configuration Manager pages, enter the IP address of the NXR-ZGW into your web
browser; the default IP address for the NXR-ZGW is 192.168.1.140. When prompted, enter your
username and password in the spaces provided.
Summary of Gateway Settings
The Summary of Gateway Settings page is the initial access point for the user.
Upon accessing the Configuration Manager, the user must enter a username and
password. The default entries are “Admin” and “1988”; changing the password as
soon as possible is highly recommended.
Copyright (c) 2007 GoAhead Software, Inc. All Rights Reserved.
FIG. 7 Summary Page
Summary Page
Firmware The version of the software running on the device.
ZigBee Firmware The version of software running on the ZigBee processor
ZigBee Stack The main version of software running on the ZigBee processor
IP The IP address of the unit
Host The hostname of the unit.
IP Address The IP address of the unit.
Subnet Mask The subnet mask associated with IP addressing