AMX NetLinx ZigBee Compatible Gateway and Repeater NXR-ZGW/-ZRP - Manual (Page 13)

Overview
7 NXR-ZGW/-ZRP
FCC Compliance
This device complies with Part 15 of the FCC rules. Subject to the following two conditions:
1. This device must not cause harmful interference and
2. This device must accept all interference, including interference that interferes with the operation of
this device.
Modifications not expressly approved by the manufacturer will void the user’s authority to operate the
equipment."
FIG. 4 Multiple PAN ID Network
CAT5 Ethernet
connection
NXR-ZGW
(Coordinator)
2 hops
1 hop
PAN ID 1
PAN ID 2
NXR-ZGW
(Coordinator)
1 hop
NXR-ZRP
(Router)
NetLinx Master
NXR-ZRP
(Router)
3 hops
NetLinx Master
CAT5 Ethernet
connection
Mio R-4
Mio R-4 Mio R-4 Mio R-4
Mio R-4
Mio R-4 Mio R-4 Mio R-4
This device has been evaluated and found to be compliant with the FCC Rules for RF
Exposure when the device is operated at a minimum separation distance of 2 cm.
from the user and nearby persons. Operation of this device at closer distances
should be avoided.