beautypg.com

Enabling or disabling the telnet server – Allied Telesis AT-S81 User Manual

Page 204

background image

Chapter 18: Basic Switch Parameters

204

Section II: Web Browser Interface

Enabling or Disabling the Telnet Server

To enable or disable the Telnet server, perform the following procedure:

1. From the Basic Config menu, select User Interface.

2. From the User Interface menu, select User Interface.

The User Interface page is shown in Figure 50 on page 200.

3. For the Telnet Server parameter, choose Enable or Disable from the

list.

The default is Enable. When you enable this parameter, a Telnet
connection to the switch is available.

4. Click Apply.

See also other documents in the category Allied Telesis Computer hardware: