Allied Telesis AT-S81 - Manual (Page 114)

Chapter 9: Virtual LANs
114 Section I: Using the Menus Interface
Deleting a VLAN
To delete a VLAN, perform the following procedure:
1. From the Main Menu, type A to select Advanced Switch
Configuration.
The Advanced Switch Configuration Menu is shown in Figure 15 on
page 75.
2. From the Advanced Switch Configuration Menu, type V to select
VLAN Management.
The VLAN Management Menu is shown in Figure 21 on page 105.
3. Type D to select Delete VLAN.
The following prompt is displayed:
Enter VLAN ID >
4. Type the VLAN ID of the VLAN you want to delete and press Enter.
You can enter only one VID.
Note
The VLAN is immediately deleted with no confirmation prompt.
Note
You cannot delete the Default VLAN which has a VID of 1.
The VLAN Management Menu is updated to show that the VLAN is
deleted. The untagged port members of a deleted VLAN are
automatically returned to the Default_VLAN with a PVID of 1.