Allied Telesis AT-S81 - Manual (Page 106)

Chapter 9: Virtual LANs
106 Section I: Using the Menus Interface
3. From the VLAN Management Menu, type C to select Create VLAN.
The VLAN Creation Menu is shown in Figure 22.
Figure 22. VLAN Creation Menu
4. To specify the VLAN ID, do the following:
a. Type I to select Set VLAN ID/Index.
The following prompt is displayed:
Set VLAN ID->Enter VLAN ID>
Note
A VLAN must have a VID.
b. Enter a value from 2 to 4094 and press Enter.
5. To specify the VLAN name, do the following:
a. Type N to select Set VLAN Name.
The following prompt is displayed:
Set VLAN Name -> Enter VLAN Name >
b. Type a name for the VLAN and press Enter. The VLAN name can
contain up to 32 characters including spaces.
AT-8000/8POE Local Management System
VLAN Management -> VLAN Creation Menu
VLAN ID :
VLAN Name:
Port Member
----------------------------------------------------------------------
------------------------- ----------------------------------
Set VLAN [I]D/[I]ndex
S[e]lect Port Member
Set VLAN [N]ame [A]pply
[Q]uit to Previous Menu
Command>