Allied Telesis AT-WA7400 - Manual (Page 55)

55
Chapter 3
Troubleshooting
If the AT-WA7400 Wireless Access Point is not operating correctly,
do one of the following:
ˆ Press the Reset to Default button once to reboot the access
point. You can also reset the access point through the AT-S77
management software. See Chapter 20, “Maintenance and
Monitoring” in the AT-WA7400 Management Software User’s
Guide.
ˆ Hold in the Reset to Default button for more than five seconds to
restore the factory default settings. You can also restore the
factory default settings through the AT-S77 management
software. See Chapter 20, “Maintenance and Monitoring” in the
AT-WA7400 Management Software User’s Guide.