Allied Telesis AT-WA7400 - Manual (Page 20)

Chapter 1: Overview
20
Features
The features of the AT-WA7400 Wireless Access Point include:
ˆ High performance 54 Mbps data rate (802.11g - 802.11a with an
upgrade as described in Appendix A, “Radio Bands” on page
59.)
ˆ Security support via 802.11i (WPA2), WPA-PSK, TKIP, AES,
IEEE 802.1x, and EAP/802.1
ˆ Multiple BSSID and Virtual LAN (VLANs)
ˆ Inhibit SSID broadcast and Ignore SSID scan
ˆ MAC Access Control for wireless interface
ˆ Load balancing
ˆ 802.11e (WMM only)
ˆ Wireless Distribution System (WDS) for Wireless Bridge Mode
supported
ˆ AP clustering
ˆ Rogue AP detection
ˆ Transmit power control/limiting
ˆ Power over Ethernet (PoE) capable
ˆ Two radios and two antennas (to activate the second radio, a
firmware upgrade is required)
ˆ One 10/100 Fast Ethernet port with auto-negotiation, and auto
MDI/MDIX, back pressure, and flow control