beautypg.com

Powering on the access point, Do one of the following, Chapter 2: installation 38 – Allied Telesis AT-WA7400 User Manual

Page 38

background image

Chapter 2: Installation

38

Powering On the Access Point

To power on the access point, perform the following procedure:

1. Do one of the following:

a. Plug the power cord on the adapter into the power connector

on the back panel, as shown in Figure 9, and plug the power
adapter into a wall outlet.

Figure 9. Connecting the Power Adapter

Warning: Do not work on equipment or cables during
periods of lightning activity.4

Warning: Power cord is used as a disconnection
device. To de-energize equipment, disconnect the
power cord. 5

309

5V,2.8

A

RESE

T TO

DEFA

ULT

LAN