Allied Telesis AT-WA7400 - Manual (Page 23)

AT-WA7400 Wireless Access Point Installation Guide
23
LEDs
The system LEDs on the AT-WA7400 Wireless Access Point are
described in Table 2.
The LAN LEDs are described in Table 3.
Table 2. System LEDs
LED State Description
Power Off The access point is not receiving power.
Green The access point is receiving power.
Test Off No system maintenance in progress.
Amber System startup or maintenance in
progress.
Table 3. LAN LEDs
LED State Description
LNK/ACT (100M) On The access point is operating
at 100 Mbps.
Off The access point is not
operating at 100 Mbps.
Blinking The access point is sending or
receiving data at 100 Mbps.
LNK/ACT (10 M) On The access point is operating
at 10 Mbps.