Allied Telesis AT-WA7400 - Manual (Page 30)

Chapter 2: Installation
30
Unpacking the Access Point
To unpack the AT-WA7400 Wireless Access Point, perform the
following procedure:
1. Remove all components from the shipping package.
Note
Store the packing material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesyn.
2. Place the access point on a secure, level surface.
3. Ensure that the following hardware components are included in
your access point package. If any item is missing or damaged,
contact your Allied Telesyn sales representative for assistance.
ˆ One AT-WA7400 Wireless Access Point
ˆ Two antennas
ˆ One wall mount kit containing two wall anchors and two
screws
ˆ One AC adapter
ˆ One RJ45 management cable
ˆ Four rubber feet
ˆ One magnet kit containing four magnets and four screws
ˆ One documentation CD with KickStart utility
ˆ This installation guide
ˆ Warranty card