Allied Telesis AlliedView-EMS 3.10 VLAN MANAGER - Manual (Page 46)

6.7.2 Add/Modify VLAN Dialogs
The Add/Modify VLAN Dialogs display the following Input Fields:
Input Field Valid Values Length
Name (cannot be
modified)
- Alphanumeric characters
- Underscore ("_")
- Dash ("-")
Note - VLAN names must contain at least one (1)
alphabet character.
1 - 19 characters
Identifier (cannot
be modified)
1 - 4094 -
6.7.3 Notes
• An uplink port must be specified to change the VLAN Mode to "Multiple VLAN" or
to "802.1Q Multiple VLAN". Specifying an incorrect port as the uplink port will
cause VLAN Manager to lose connection with the devcie without any warning.
Exercise caution.
• Modifying the default VLAN definition will cause all other VLAN definitions to be
deleted. When this happens, the device will need to be restarted.
6 Device Support
AlliedView™-EMS 3.10 VLAN Manager User’s Guide Page 46 of 71