Allied Telesis AlliedView-EMS 3.10 VLAN MANAGER - Manual (Page 36)

6.2.2 Add/Modify VLAN Dialogs
The Add/Modify VLAN Dialogs have the following Input Fields:
Input Field Valid Values Length
Name
- Alphanumeric characters
- Special characters except the following:
• Hash Sign ("#")
• Period (".")
• Colon (":")
• Right Angle Bracket (">")
• Question Mark ("?")
1 - 32 characters
Identifier (cannot
be modified)
2 - 4093 -
6.2.3 Notes
• On Import VLAN, VLAN Manager will automatically trim leading/embedded/trailing
spaces from VLAN Names.
• For Import operations, ports that are members of a port channel should not be
specified individually as forbidden ports of a VLAN in the VLAN configuration file.
Doing so will result in a successful import status for the VLAN but the ports are not
actually set to Forbidden. To set port channel members to Forbidden, specify the
ports as a single unit using the port channel.
• If a port on a Non-Existing device is associated with a port channel, its tool tip text
on the Device Panel will continue to show its interface name instead of its port
channel number.
• The Default VLAN cannot be imported into or exported from VLAN Manager.
• VLAN Names that contain any of the invalid special characters may cause VLAN
Manager to hang. To avoid this, do not use any of the invalid special characters when
defining VLAN Names through the CLI.
• Ports or port channels that are General Untagged members of more than one
VLAN cannot be associated as Trunk members of another VLAN. Attempting to do
so will result in the error message: "Port / Channel
belongs to multiple untagged VLANs."
• Ports or port channels that are Trunk or General members of more than one VLAN
cannot be associated as Access members of another VLAN. Attempting to do so will
result in the error message: "Port / Channel belongs to
multiple VLANs. "
AlliedView™-EMS 3.10 VLAN Manager User’s Guide Page 36 of 71