Allied Telesis AT-MC13 - Manual (Page 23)

23
Chapter 2
Installation
This chapter explains how to install the AT-MC13 media converter. This
media converter can be used on a desktop or installed in an AT-MCR1 or
AT-MCR12 chassis. To install an AT-MC13 media converter in an
AT-MCR1 or AT-MCR12 chassis, refer to the chassis’ installation guides.
Verifying Package Contents
Make sure the following items are included in your package. If any item is
missing or damaged, contact your Allied Telesis sales representative for
assistance.
ˆ One AT-MC13 Media Converter
ˆ Four protective feet (for desktop use only)
ˆ External AC/DC power adapter (North America, Continental Europe,
United Kingdom, or Australia)
ˆ This installation guide
ˆ Warranty card
Note
For information on the power supply used with the AT-MC13 media
converter, refer to “External Power Adapter” on page 20.