Allied Telesis AT-S63 - Manual (Page 571)

AT-S63 Management Software Menus User’s Guide
Section VIII: Port Security 571
The Configure Port Access Role menu is shown in Figure 212.
Figure 212. Configure Port Access Role Menu
5. Type 1 to select Port Role.
The following prompt is displayed:
Enter new Port Role [N-None, A-Authenticator,
S-Supplicant] ->
6. If you type N for None, the port does not participate in port access
control. This is the default setting. If the port is connected to a
supplicant, type A to set the port’s role to Authenticator. If the port is
connected to an authenticator, type S to set the port’s roles to
Supplicant.
7. Repeat this procedure starting with Step 3 to configure the role of the
other ports on the switch.
After you have set port roles, go to “Configuring Authenticator Port
Parameters” on page 573 and “Configuring Supplicant Port
Parameters” on page 579 to configure the port settings.
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Configure Port Access Role
Configuring Port 3
1 - Port Role ......... None
R - Return to Previous Menu
Enter your selection?