Allied Telesis AT-S63 - Manual (Page 240)

Chapter 13: Access Control Lists
240 Section II: Advanced Operations
Displaying ACLs
To display the ACLs on a switch, perform this procedure:
1. From the Main Menu, type 7 to select Security and Services.
2. From the Security and Services menu, type 4 to select Access Control
Lists.
The Access Control Lists (ACL) menu is shown in Figure 78 on page
232.
1. From the Access Control Lists (ACL) menu, type 4 to selection Show
ACLs.
An example of the Show ACLs window is illustrated in Figure 82.
Figure 82. Show ACLs Menu
This menu is for viewing purposes only. To modify an ACL, refer to
“Modifying an ACL” on page 235. The columns in the display are
explained here:
ˆ ACL ID - The ACL’s ID number.
ˆ Description - The description of the ACL.
ˆ Active - The status of the ACL. An ACL is deemed active if it is
assigned to at least one port. An ACL is deemed inactive if it is not
assigned to any ports.
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Show ACLs
Number of ACLs: 12
ID
Description Active
-------------------------------------------------------
1
IP - deny Yes
2 HTTP - permit Yes
3 TCP - deny No
4 Src22.49 - deny Yes
5 P-149.22.22.22 Yes
6 Dst22.50 Yes
7 ARP packets - deny No
D - Detail ACL Display
N - Next Page
U - Update Display
R - Return to Previous Menu
Enter your selection?