Allied Telesis AT-S63 - Manual (Page 241)

AT-S63 Management Software Menus User’s Guide
Section II: Advanced Operations 241
2. To view the details of a ACL, type D to select Detail Classifier Display.
The following prompt is displayed:
Enter ACL ID : [0 to 250] -> 0
3. Enter the ID number of the ACL you want to display. The details of the
selected ACL are displayed.
An example of the Display ACL Details window is illustrated in
Figure 83.
Figure 83. Display ACL Details Menu
This menu is for viewing purposes only. To modify an ACL, refer to
“Modifying an ACL” on page 235. The information in the menu is
described here:
ˆ ACL ID - The ACL’s ID number.
ˆ Description - The description of the ACL.
ˆ Action - The action of the ACL. An active of Permit means that the
port(s) where the ACL is assigned accepts those packets that meet
the criteria of the ACL’s classifiers. An action of Deny means that
the port(s) discards the packets provided that the packets do not
also meet the criteria of a classifier of a Permit ACL assigned to the
same port.
ˆ Classifier List - The classifiers assigned to the ACL. An ACL can
have more than one classifier.
ˆ Port List - The ports where the ACL is assigned. An ACL can be
assigned to more than one port.
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Display ACL Details
1 - ACL ID .............. 1
2 - Description ......... IP - Deny
3 - Action .............. Deny
4 - Classifier List ..... 1
5 - Port List ........... 2-4
U - Update Display
R - Return to Previous Menu
Enter your selection?