Allied Telesis AT-S82 - Manual (Page 73)

AT-S82 Management Software User’s Guide
73
9. From the Forwarding BPDU list, select one of the following:
Enabled
The AT-GS950/8 WebSmart switch does not process the BPDU
packets but forwards them to adjacent switches. This is the default
setting.
Disabled
The switch processes the BPDU packets. Allied Telesis recommends
that you choose this setting.
10. Click Apply.
To configure the ports, refer to “Configuring STP Port Settings” on
page 74.
11. To save the settings to the configuration file, from the main menu,
select Save Configuration.
The Save Configuration page is shown in Figure 3 on page 14.
12. Click Apply.