Allied Telesis AT-S82 - Manual (Page 22)

Chapter 2: Basic Switch Parameters
22
Changing the Administrator’s Password
To reset the administrator’s password, perform the following procedure:
1. From the main menu, select Administrator Password.
The Administrator Password page is shown in Figure 5.
Figure 5. Administrator Password Page
2. In the Old Password field, type the old password.
3. In the New Password field, type the new password.
4. In the Confirm Password field, retype the new password.
5. Click Apply to implement your changes.
6. To save the settings to the configuration file, from the main menu,
select Save Configuration.
The Save Configuration page is shown in Figure 3 on page 14.
7. Click Apply.