Allied Telesis AT-S82 - Manual (Page 24)

Chapter 2: Basic Switch Parameters
24
Resetting the Switch and Retaining the IP Address
There are two options for resetting the switch:
ˆ Reset all the parameters except the IP address
ˆ Reset the switch to return all the parameters to their default values
The procedure for resetting the switch to the default values is described in
“Returning the AT-S82 Management Software to the Factory Default
Values” on page 25.
To reset the switch and retain the IP address, perform the following
procedure:
1. From the main menu, select Reset.
The Reset page is shown in Figure 6.
Figure 7. Reset Page
2. Click Apply.
The switch is reset.