Allied Telesis AT-S63 - Manual (Page 338)

Chapter 21: GARP VLAN Registration Protocol
338 Section V: Virtual LANs
Displaying the GVRP State Machine
To display the GVRP state machine, perform the following procedure:
1. From the Home page, select Monitoring.
2. From the Monitoring menu, select the Layer 2 option.
3. Select the GVRP tab.
The GVRP tab is shown in Figure 134 on page 335.
4. In the View GVRP Parameters section, click View GVRP State
Machine for VLAN and enter the VLAN number in the box.
5. Click View.
The GVRP State Machine for VLAN page is shown in Figure 137.
Figure 137. GVRP State Machine for VLAN Page
The GVRP State Machine for VLAN page provides the information
shown in
Table 11 .
Table 11. GVRP State Machine Parameters
Parameter Meaning
Port Port number on the switch; this port belongs to
the GARP application. If the GARP application
has no ports, “No ports have been assigned” is
displayed.