Allied Telesis AT-S63 - Manual (Page 182)

Chapter 14: Quality of Service
182 Section II: Advanced Operations
The Modify Policy page is shown in Figure 66.
Figure 66. Modify Policy Page
5. Modify the parameters as needed. For parameter definitions, refer to
“Configuring a Policy” on page 178.
6. When you are finished configuring the parameters, click Apply.
The changes are immediately implemented in the policy.
7. To permanently save your changes, select the Save Config option in
the Configuration menu.
Deleting a Policy To delete a policy, perform the following procedure:
1. From the home page, select Configuration.
2. From the Configuration menu, select the Services option.
3. Select the Policies tab.
The Policies tab is shown in Figure 64 on page 178.
4. Select a policy from the list and click Delete. You can only delete one
policy at a time.
The policy is deleted from the switch.