Allied Telesis AT-S63 - Manual (Page 146)

Chapter 12: Access Control Lists
146 Section II: Advanced Operations
Configuring an Access Control List
This procedure explains how to create an ACL. Before starting this
procedure, jot down on paper the ID number(s) of the classifier(s) to be
assigned to the ACL. This information will make it easier for you to perform
the procedure. To view the classifier ID numbers and specifications, refer
to “Displaying the Classifiers” on page 143.
To configure an access control list, perform the following procedure:
1. From the home page, select Configuration.
2. From the Configuration menu, select the Network Security option.
3. Select the ACL tab.
The ACL tab is shown in Figure 45.
Figure 45. ACL Tab (Configuration)
The Current ACL(s) section of the tab displays a table of the existing
ACLs. The table has the following columns of information:
ID
The ID number of the ACL.
Description
A description of the ACL.
Action
The ACL action of Permit or Deny. An action of Permit means the port