Allied Telesis AT-S63 - Manual (Page 305)

AT-S63 Management Software Web Browser User’s Guide
Section IV: Spanning Tree Protocols 305
Table 10 lists the MSTP port costs with the Auto setting when the port
is part of a port trunk.
Edge Port
This parameter defines whether the port is functioning as an edge port.
The possible settings are Yes and No. For an explanation of this
parameter, refer to “Point-to-Point and Edge Ports” in Chapter 22,
“Spanning Tree and Rapid Spanning Tree Protocols” in the AT-S63
Management Software Features Guide.
8. After configuring the parameters, click Apply.
9. To permanently save your changes, select the Save Config option in
the Configuration menu.
10. Repeat this procedure to configure the MSTP parameters for other
switch ports.
Table 10. MSTP Auto External Path Trunk Costs
Port Speed Port Cost
10 Mbps 20,000
100 Mbps 20,000
1000 Mbps 2,000