Leds, Figure 1: front and back panels – Allied Telesis AT-TQ2403 User Manual
Page 11
AT-TQ2403 IEEE 802.11abgh, Dual Radio, Enterprise Wireless Access Point Installation Guide
11
Figure 1: Front and Back panels
LEDs
The system LEDs on the AT-TQ2403 IEEE 802.11abgh, Dual Radio, Enterprise Wireless Access Point are
described in Table 1.
Table 1: System LEDs
LED
State Description
POWER Off
The access point is not receiving power.
Green The access point is receiving power.
TEST
Off
No system maintenance in progress.
Amber System startup or maintenance in progress.
The LAN LEDs are described in Table 2.
Table 2: LAN LEDs
LED
State
Description
LNK/ACT (100M) On
The access point is operating at 100 Mbps.
Off
The access point is not operating at 100 Mbps.
Blinking The access point is sending or receiving data at 100 Mbps
LNK/ACT (10M)
On
The access point is operating at 10 Mbps.
Off
The access point is not operating at 10 Mbps.
Blinking The access point is sending or receiving data at 10 Mbps
The Wireless LEDs are described in Table 3.
Table 3: Wireless LEDs
LED
State
Description
LNK/ACT (WLAN a) Off
No link is detected.
Green
An 802.11a WLAN link has been made.
Blinking Green Network activity is occurring.
LNK/ACT (WLAN g) Off
No link is detected.
Green
An 802.11g WLAN link has been made.
Blinking Green Network activity is occurring.