Allied Telesis AT-TQ2403 - Manual (Page 10)

10 AT-TQ2403 - IEEE 802.11abgh, Dual Radio, Enterprise Wireless Access Point - Installation Guide
Chapter 1: Overview
The AT-TQ2403 IEEE 802.11abgh, Dual Radio, Enterprise Wireless Access Point is a wireless
communications hub for devices on your network. It provides continuous, high-speed access between your
wireless and Ethernet devices. You administer the AT-TQ2403 IEEE 802.11abgh, Dual Radio, Enterprise
Wireless Access Point using the AT-TQ2403 web interface configuration menu.
Features
The features of the AT-TQ2403 IEEE 802.11abgh, Dual Radio, Enterprise Wireless Access Point include:
• High performance up to 108 Mbps data rate
• Security support via 802.11i (WPA2), WPA-PSK, TKIP, AES, IEEE 802.1x, and EAP/802.1
• Multiple BSSID and Virtual LAN (VLANs)
• Inhibit SSID broadcast and Ignore SSID scan
• MAC Access Control for wireless interface
• Load balancing
• 802.11e (WMM only)
• Wireless Distribution System (WDS) for Wireless Bridge Mode supported
• AP clustering
• Rogue AP detection
• Transmit power control/limiting
• IEEE 802.3af Power over Ethernet (PoE) capable
• Two independent radios for concurrent 2.4 GHz and 5 GHz operations
• Antenna diversity on both 2.4GHz and 5GHz
• One 10/100 Fast Ethernet port with auto-negotiation, and auto MDI/MDIX, back pressure, and flow
control
Front and Back Panels
The LEDs on the front panel show the power and connection status while power, LAN and antenna
connectors are on the back panel together with a reset button.