Allied Telesis AT-2711 Series Adapters - Manual (Page 93)

AT-2711 Series Fast Ethernet Adapter Installation Guide
93
Large Send Offload v2 (IPv4)
The Large Send Offload v2 (IPv4) feature allows you to control the load of
sending out large packets. When this feature is enabled, the AT-2711
series adapter segments large packets for IPv4 traffic and reduces the
CPU load.
This feature, which supports large packets up to 256kb, overrides the
Large Send Offload (IPv4) feature if both features are enabled.
To enable or disable the Large Send Offload v2 (IPv4) feature, do the
following:
1. Access the Advanced Properties.
See “Accessing Advanced Properties” on page 76.
2. Select Large Send Offload v2 (IPv4) in the Property box.
The Large Send Offload v2 (IPv4) page is displayed as shown in
Figure 50.
Figure 50. Large Send Offload v2 (IPv4) Page