Allied Telesis AT-2711 Series Adapters - Manual (Page 57)

AT-2711 Series Fast Ethernet Adapter Installation Guide
57
Updating the
Driver on
Windows Server
2003 or Windows
XP
To install the driver software for the AT-2711 series adapter card onto the
Windows Server 2003 and Windows XP, do the following:
1. Access Device Manager. See “Accessing Device Manager on
Windows Server 2003 or Windows XP” on page 42.
2. In the Device Manager window, right-click Allied Telesis AT-
2711xXV2 100Mb Fiber Ethernet.
The shortcut menu appears as shown in Figure 35.
Figure 35. Network Adapters on Windows Server 2003 and XP
3. Select Update Driver.
The Hardware Update Wizard window pops up as shown in Figure 29
on page 51.
4. Select No, not this time.
5. Click Next.
The Hardware Update Wizard prompts you to select one of two options
as shown in Figure 30 on page 52.
6. Select Install from a list or specific location (Advanced).
7. Click Next.
The Hardware Update Wizard prompts you to specify the location of
your driver software as shown in Figure 31 on page 53.