Allied Telesis AT-2711 Series Adapters - Manual (Page 127)

AT-2711 Series Fast Ethernet Adapter Installation Guide
127
Figure 69. Command Window with ipconfig/all displayed
4. Type ping IP_address from the command line, then press Enter.
The network connectivity information is displayed, as shown in
Figure 70.
Figure 70. Command Window with ping displayed
Linux
To verify that the Ethernet interface is up and running, run 'ifconfig' to
check the status of the Ethernet interface. In addition, you can use the
'netstat -i' command to check the statistics on the Ethernet interface.
Consult the manual pages for more information about the 'ifconfig' and
'netstat' commands.