Allied Telesis AT-2711 Series Adapters - Manual (Page 84)

Modifying Advanced Properties
84
Flow Control
The Flow Control feature allows you to control the flow between the AT-
2711 series adapter and its link partner. You can enable or disable the
adapter to process received PAUSE frames and transmit PAUSE frames.
Note
The options and default setting depend on your operating system
and driver version that you installed.
To enable or disable the Flow Control feature, do the following:
1. Access the Advanced Properties.
See “Accessing Advanced Properties” on page 76.
2. Select Flow Control in the Property box.
The Flow Control page is displayed as shown in Figure 43.
Figure 43. Flow Control Page