Allied Telesis AT-2711 Series Adapters - Manual (Page 83)

AT-2711 Series Fast Ethernet Adapter Installation Guide
83
Ethernet@WireSpeed
The Ethernet@WireSpeed is a feature to connect two gigabit devices even
when the devices are connected through an impaired copper cable.
To view the Ethernet@WireSpeed setting, do the following:
1. Access the Advanced Properties.
See “Accessing Advanced Properties” on page 76.
2. Select Ethernet@WireSpeed in the Property box.
The Ethernet@WireSpeed page is displayed as shown in Figure 42.
Figure 42. Ethernet@WireSpeed Page
The Ethernet@WireSpeed feature is disabled.
3. Click OK.