Allied Telesis AT-2911GP Network Adapters - Manual (Page 58)

AT-2911GP Gigabit Fiber Ethernet PoE+ Adapters Installation and User’s Guide
58
8. Repeat step 2 to step 7 on the other Allied Telesis AT-2911GP
Ethernet entry.
Updating the
Driver on
Windows Server
2003 or Windows
XP
To install the driver software for the AT-2911GP adapter card onto the
Windows Server 2003 and Windows XP, do the following:
1. Access Device Manager. See “Accessing Device Manager on
Windows Server 2003 or Windows XP” on page 42.
2. In the Device Manager window, right-click an Allied Telesis
AT-2911GP Ethernet entry.
The shortcut menu appears as shown in Figure 41.
Figure 41. Network Adapters on Windows Server 2003 and XP
3. Select Update Driver.
The Hardware Update Wizard window pops up as shown in Figure 35
on page 52.
4. Select No, not this time.
5. Click Next.
The Hardware Update Wizard prompts you to select one of two
options as shown in Figure 36 on page 52.
6. Select Install from a list or specific location (Advanced).
7. Click Next.