Allied Telesis AT-2911GP Network Adapters - Manual (Page 124)

AT-2911GP Gigabit Fiber Ethernet PoE+ Adapters Installation and User’s Guide
124
Transmit Buffers
The Transmit Buffers property specifies the number of packet transmit
buffers allocated for the adapter port.
To change the Transmit Buffers value, do the following:
1. Access the Device Manager on your operating system.
See “Accessing Advanced Properties” on page 87.
2. Select Transmit Buffers in the Property box.
The Transmit Buffers page is displayed as shown in Figure 83.
Figure 83. Transmit Buffers Page
3. Specify the number of transmit buffers that you want the system
allocates.
The range of the value is from 100 to 600. The default value is 500.
4. Click OK.