Allied Telesis AT-2911GP Network Adapters - Manual (Page 132)

AT-2911GP Gigabit Fiber Ethernet PoE+ Adapters Installation and User’s Guide
132
WOL Speed
The WOL Speed property allows you to specify the speed of Wake-on-
LAN on your adapter port.
To view this setting, do the following:
1. Access the Advanced Properties.
See “Accessing Advanced Properties” on page 87.
2. Select WOL Speed in the Property box.
The WOL Speed page is displayed as shown in Figure 90.
Figure 90. WOL Speed Page
3. Select one of the following options:
 10 Mb — The speed of Wake-on-LAN is 10 Mbps.
 100 Mb — The speed of Wake-on-LAN is 10 Mbps.
 Auto — The speed of Wake-on-LAN is auto negotiated.
 Lowest Speed Advertised — This is the default setting.
4. Click OK.