Allied Telesis AT-2911GP Network Adapters - Manual (Page 128)

AT-2911GP Gigabit Fiber Ethernet PoE+ Adapters Installation and User’s Guide
128
Wake Up Capabilities
The Wake Up Capabilities feature enables the adapter to wake up from a
low-power mode when the adapter port receives a network wake-up data
unit. Two types of wake-up data units can be accepted: Magic packet and
Wake Up frame.
To change the Wake Up Capabilities property, do the following:
1. Access the Advanced Properties.
See “Accessing Advanced Properties” on page 87.
2. Select Wake Up Capabilities in the Property box.
The Wake Up Capabilities page is displayed as shown in Figure 87.
Figure 87. Wake Up Capabilities Page
3. Select one of the following options if available:
Note
The options and default setting depend on your operating system
and the version of the driver that you installed.
 Both — The adapter wakes up from a low-power mode when
receiving a Magic packet or Wake Up frame. This is the default
setting.