Allied Telesis AT-DC2552XS - Manual (Page 71)

Stack Installation Guide for AT-2552XS L2 Data Center Switch
71
 Stop bits: 1
 Flow control: None
Note
The port settings are for a DEC VT100 or ANSI terminal, or an
equivalent terminal emulator program.
4. Press Enter.
You are prompted for a user name and password.
5. When prompted, enter a user name and password to log on the switch.
If this is the initial management session of the switch, enter “manager”
as the user name “friend” as the password. The user name and
password are case sensitive.
You are now logged into the switch’s management software. Refer to the
AT-DC2552XS Management Software Command Line Interface User’s
Guide for more information about the switch’s CLI commands.