Allied Telesis AT-IMC1000T/SFP - Manual (Page 19)

Hardware Installation Installation Steps
19 AT-IMC1000T/SFP Industrial Gigabit PoE+ Media Converter User Manual
8. Insert the fiber cable LC connector into SFP module as shown in Figure 5-3 .
FIGURE 5-3 LC connector to SFP module
5.2.1 Removing the LC connector from the transceiver
1. Press the release tabs on the upper side of the LC connector and pull the fiber cable out of the SFP module.
See Figure 2-6 for the location of the fiber cable release tabs.
FIGURE 5-4 Remove LC connector
2. Second, push down the metal loop and pull the SFP module out by the plastic part.