Asus Multimedia System S-presso User Manual

Page 84

4 - 3 0

C h a p t e r 4 : B I O S i n f o r m a t i o n

4.6.2

Removable Drives

1st ~ xxth Drive [1st Floppy Drive]

These items specify the boot sequence from the available removable
drives. The number of drives that appear on the screen depends on the the
number of devices installed in the system. Configuration options: [xxxxx
Drive] [Disabled]

Removable Drives

1st Drive

[1st Floppy Drive]

Specifies the boot
sequence from the
available devices.

Make sure that the Full Screen Logo item is set to [Enabled] if you want
to use the ASUS MyLogo2™ feature.

4.6.3

Boot Settings Configuration

Quick Boot [Enabled]

Enabling this item allows the BIOS to skip some power on self tests (POST)
while booting to decrease the time needed to boot the system. When set
to [Disabled], BIOS performs all the POST items.
Configuration options: [Disabled] [Enabled]

Full Screen Logo [Enabled]

This allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]

Boot Settings Configuration

Quick Boot

[Enabled]

Full Screen Logo

[Enabled]

Add On ROM Display Mode

[Force BIOS]

Bootup Num-Lock

[On]

PS/2 Mouse Support

[Auto]

Typematic Rate

[Fast]

Boot to OS/2

[No]

Wait for ‘F1’ If Error

[Enabled]

Hit ‘DEL’ Message Display

[Enabled]

Interrupt 19 Capture

[Disabled]

Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.

This manual is related to the following products:

S-presso