Asus Multimedia System S-presso - Manual (Page 81)

4 - 2 7 4 - 2 7 4 - 2 7 4 - 2 7 4 - 2 7 A S U S S - p r e s s o b a r e b o n e s y s t e m A S U S S - p r e s s o b a r e b o n e s y s t e m A S U S S - p r e s s o b a r e b o n e s y s t e m A S U S S - p r e s s o b a r e b o n e s y s t e m A S U S S - p r e s s o b a r e b o n e s y s t e m
4.5.5 4.5.5 4.5.5 4.5.5 4.5.5 APM Configuration APM Configuration APM Configuration APM Configuration APM Configuration
Restore on AC Power Loss [Power Off] Restore on AC Power Loss [Power Off] Restore on AC Power Loss [Power Off] Restore on AC Power Loss [Power Off] Restore on AC Power Loss [Power Off]
When set to Power Off, the system goes into off state after an AC power
loss. When set to Power On, the system goes on after an AC power loss.
Configuration options: [Power Off] [Power On]
Power On By PS/2 Devices [Disabled] Power On By PS/2 Devices [Disabled] Power On By PS/2 Devices [Disabled] Power On By PS/2 Devices [Disabled] Power On By PS/2 Devices [Disabled]
Allows you to use specific keys on the keyboard or the mouse to turn on
the system. This feature requires an ATX power supply that provides at
least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]
Power On By External Modems [Disabled] Power On By External Modems [Disabled] Power On By External Modems [Disabled] Power On By External Modems [Disabled] Power On By External Modems [Disabled]
Allows either settings of [Enabled] or [Disabled] for powering up the
computer when the external modem receives a call while the computer is in
Soft-off mode. Configuration options: [Disabled] [Enabled]
APM Configuration
Restore on AC Power Loss [Power Off]
Power On By PS/2 Devices [Disabled]
Power On By External Modems [Disabled]
Power On By PCI Devices [Disabled]
Power On By RTC Alarm [Disabled]
Set power state
after AC power
failure.
The computer cannot receive or transmit data until the computer and
applications are fully running. Thus, connection cannot be made on the
first try. Turning an external modem off and then back on while the
computer is off causes an initialization string that turns the system
power on.
Power On By PCI Devices [Disabled] Power On By PCI Devices [Disabled] Power On By PCI Devices [Disabled] Power On By PCI Devices [Disabled] Power On By PCI Devices [Disabled]
When set to [Enabled], this parameter allows you to turn on the system
through a PCI LAN or modem card. This feature requires an ATX power
supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Power On By RTC Alarm [Disabled] Power On By RTC Alarm [Disabled] Power On By RTC Alarm [Disabled] Power On By RTC Alarm [Disabled] Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this
item is set to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC
Alarm Minute, and RTC Alarm Second appear with set values.
Configuration options: [Disabled] [Enabled]