Asante Technologies 10NIC-PCITM - Manual (Page 19)

Page 3-3
Installing the Open Transport Driver and Ethernet Options Control Panel
4 Double-click the AsantéNIC Installer icon.
5 Click OK when the Asanté installer splash screen appears.
The Easy Install dialog box appears.
▲ Important! To properly install the Open Transport
driver, you must use this Installer program. Do not drag the
files to the System Folder; doing so may not install the files
properly.
6 Click the Install button.
The Installer places the AsantéNIC™ OT driver in the
Extensions Folder and the Asanté Ethernet Options Control
Panel in the Control Panels folder.
Figure 3-2 Driver and Control Panel Components
7 Click the Restart button when the message appears stat-
ing that the installation was successful.
After successfully installing the adapter, connecting it to an
active network, installing the driver and control panel, and
restarting your Macintosh, you must configure the Apple-
Talk control panel to recognize the Asanté 10NIC-PCI
adapter, following the instruction below.
Configuring the AppleTalk Control Panel
8 Open the Apple Menu and select Control Panels .
9 Select AppleTalk from the Control Panels submenu.
The AppleTalk control panel appears.
Figure 3-3 AppleTalk Control Panel set to Asanté 10NIC-PCI adapter.
10 Click once on the “Connect via:” dropdown menu.