ADC Campus-REX RS Interface Card - Manual (Page 53)

Set Up the Campus-REX System
Campus-REX RS Interface Card User Manual 3-25
4 If the Bridge/Router Mode is set to Bridge, type then press .
The Bridge/Router Configuration menu displays the router options.
5 To change the packet encapsulation format, type then press .
The Encapsulation option changes from HDLC to PPP.
Dec 9, 1999 ADC DSL SYSTEMS INC., CAMPUS RS, Version x.xx 13:17:00
Local Unit ID: Campus-REX Unit #34 Local I/F: REX
Remote Unit ID: Campus-REX Unit #12 Remote I/F: REX
Circuit ID: Network Extension Circuit 5001
BRIDGE/ROUTER CONFIGURATION
MODE SETTING 1) Bridge/Router Mode: Bridge (Bridge, Router)
2) Encapsulation: HDLC (HDLC, PPP)
3) Timing Source: Internal (Internal, HDSL)
4) Spanning Tree: Disabled (Disabled, Enabled)
5) Local IP Address: 0.0.0.0
6) Local Subnet Mask: 255.255.255.0
7) Default Router: 0.0.0.0
8) BOOT Mode: Local (Local, Network)
(R)eturn (M)ain Menu
ENTER CHOICE>
1 ENTER
May 3, 1999 ADC DSL SYSTEMS INC., CAMPUS RS, Version x.xx 13:17:19
Local Unit ID: Campus-REX Unit #34 Local I/F: REX
Remote Unit ID: Campus-REX Unit #12 Remote I/F: REX
Circuit ID: Network Extension Circuit 5001
BRIDGE/ROUTER CONFIGURATION
MODE SETTING 1) Bridge/Router Mode: Router (Bridge, Router)
2) Encapsulation: HDLC (HDLC, PPP)
3) Timing Source: Internal (Internal, HDSL)
LAN PORT 4) LAN IP Address: 0.0.0.0
5) LAN Subnet Mask: 0.0.0.0
LINE PORT 6) Line IP Address: 0.0.0.0
7) Line Subnet Mask: 0.0.0.0
DESTINATION SUBNET MASK GATEWAY ADDRESS
8) Default Router: 0.0.0.0
IP STATIC 9) 0.0.0.0 0.0.0.0 0.0.0.0
ROUTING 10) 0.0.0.0 0.0.0.0 0.0.0.0
TABLE 11) 0.0.0.0 0.0.0.0 0.0.0.0
(R)eturn (M)ain Menu
ENTER CHOICE>
2 ENTER
CAD1069i5.book Page 25 Thursday, May 30, 2002 7:32 AM